-
FAQ - Pachislo
-
If you're new to pachislos, aka Japanese slot machines, this is the place to start.
Title Filter
Keyword Filter
-
Entries
-
So your belly light is out
So your belly light is out, and now how do you do to it to change it ?
On the inside of the door are two tabs (some machines have 3 tabs). these are part of the belly glass frame, so if your frame is chrome than the tabs will be chrome. Or black frame, black tabs. I am using a Spin Luck to show you.
As you can see, I am using my thumb to push them down and out (some machines have slide locks, like Zett-30, if so slide them first than pushdown & out). You will hear a snap click as the frame moves out.
Now look on the front, as you can see the frame is sticking out on top at an angle, put you finger on BOTH sides and pull the belly glass out and down. Genteelly the bottom is hooked in at two places on the door. But as the top comes free you lift the frame and it well come free of the bottom.
There is your Florescent light to replace, get the numbers of it and go to hardware store or just take it with you and find a replacement
To close after replacing light bulb, put the bottom hooks in and push the top tabs in. You will hear a pop sound as they set in place. Don't forget the have the door closed when you do this and have your power off, unless you want a new hair style.
One large note: there are machines (some Bellco's) that the belly frame is held on by three or four screws, so unscrew them all and soft pry the frame off. And change your bulb, reverse and screw it together.
Category
FAQ - Pachislo
|
|
|